YUKEN INDIA LIMITED - JSD ENGINEERING PRODUCTS

Shaft description :  A shaft is a rotating machine element, usually circular in cross section, which is used to transmit power from one part to another, or from a machine which produces power to a machine which absorbs power. The various members such as pulleys and gears are mounted on it. A is shaft used for : A drive shaft, driveshaft, driving shaft, propeller shaft (prop shaft), or Cardan shaft is a mechanical component for transmitting torque and rotation, usually used to connect other components of a drive train that cannot be connected directly because of distance or the need to allow for relative movement between them. There are two types of shaft:  1.Transmission Shaft :  Counter Shaft. The counter shaft lies parallel to the main shaft and is driven by the input shaft through a pinion gear. Output  Shaft . The final component that carries the power out of the   transmission   gearbox and on to the wheels is the output   shaft . 2.Machine Shaft

Yuken hydraulic accessories: Suction Strainer: Pressure Gauge :  Temperature Gauge : Gauge Isolator : Air Blast Type Oil Cooler :  General Information This valve is designed to use when a pump starts to bleed off the air which is enclosed in a suction line or another lines in the system. Instructions: When this valve is used to bleed off the air for pump start, connect inlet port of the valve adjacent as much as possible to the discharge port of the pump. For the purpose of removing the air in the line, install the air bleed valve at the highest point in the overall circuit. In either case, outlet port of the valve must be connected to the tank line and it should be extended under the oil level in the reservoir. Hydraulic Fluids Type of Hydraulic Fluids Petroleum Base Oil : Use R&O (Rust and Oxidation inhibitor) type oils or anti-ware type oils (equivalent to ISO VG-32 & 46).  Synthetic Fluids:

Semiconductor pressure switch : Anyone can easily set the pressure switches.Real time pressure indication the actual pressure is always displayed. It can be easily operated by the pressure switches.High visibility Pressure values can easily be seen even from distant and dark place. Actual pressures setting method can be set by the pressure switches without conscious of notion of a differential pressure.Wide setting range of differential pressure can be adjusted to a large extent. Relay contact output can hook up terminals and the pressure switches in a similar way of wiring mechanical pressure switches.Wiring with a connector is one output type pressure switches have adopted a connector wiring method. Two types of the pressure setting method is either an external setting method or an internal setting method. Two types of the housing A pressure port location can be selected from the two types, bottom and back. The PZA series are renewal analog type semiconductor switch

Yuken Solenoid Coil : A solenoid is a coil of insulated or enameled wire wound on a rod-shaped form made of solid iron, solid steel, or powdered iron. Devices of this kind can be used as electromagnets, as inductors in electronic circuits, and as miniature wireless receiving antennas. Purpose of solenoid coil : When the ignition switch is turned on, a small electric current is sent through the starter solenoid. This causes the starter solenoid to close a pair of heavy contacts, thus relaying a large electric current through the starter motor, which in turn sets the engine in motion. Solenoid coils working : Solenoid is the generic term for a coil of wire used as an electromagnet. It also refers to any device that converts electrical energy to mechanical energy using a solenoid. The device creates a magnetic field from electric current and uses the magnetic field to create linear motion. Needs of solenoid : When the ignition key is turned all the way to the "

Subscribe  the  Yuken  you tube channel  and get latest update of yuken hydraulic product  click the link 

Yuken Modular Valves :  Modular Valves are stack type valves, and require no piping. They not only rationalist system build, but they also meet the technical requirements for a variety of hydraulic systems. Stacking systems is a new era in hydraulics. The valves have standardized mounting surface conforming to ISO 4401 and optimum thickness for each size. Any hydraulic circuits can be easily composed by stacking the valves with mounting bolts. The valves can be used widely for hydraulic systems for various industries such as machine tools, special purpose machines, ships and steel mill equipment. Features : 1.Installation and mounting space can be minimized.↚ 2. No special skill is required for assembly and any addition or alteration of the hydraulic circuit can be made quickly and easily. 3. Problems such as oil-leaks, vibration and noise which may be caused by piping are minimized, increasing the reliability of the hydraulic system. 4. Maintenance a