YUKEN INDIA LIMITED - JSD ENGINEERING PRODUCTS

Yuken Solenoid Coil : A solenoid is a coil of insulated or enameled wire wound on a rod-shaped form made of solid iron, solid steel, or powdered iron. Devices of this kind can be used as electromagnets, as inductors in electronic circuits, and as miniature wireless receiving antennas. Purpose of solenoid coil : When the ignition switch is turned on, a small electric current is sent through the starter solenoid. This causes the starter solenoid to close a pair of heavy contacts, thus relaying a large electric current through the starter motor, which in turn sets the engine in motion. Solenoid coils working : Solenoid is the generic term for a coil of wire used as an electromagnet. It also refers to any device that converts electrical energy to mechanical energy using a solenoid. The device creates a magnetic field from electric current and uses the magnetic field to create linear motion. Needs of solenoid : When the ignition key is turned all the way to the "

DEFINING SUCCESS - " GO KISS THE WORLD " Address by Subroto Bagchi, Chief Operating Officer, MindTree Consulting to the Class of 2006 at the Indian Institute of Management, Bangalore on Defining success.- July 2nd 2004 I was the last child of a small-time government servant, in a family of five brothers. My earliest memory of my father is as that of a District Employment Officer in Koraput, Orissa. It was and remains as back of beyond as you can imagine. There was no electricity; no primary school nearby and water did not flow out of a tap. As a result, I did not go to school until the age of eight; I was home-schooled. My father used to get transferred every year. The family belongings fit into the back of a jeep - so the family moved from place to place and, without any trouble, my Mother would set up an establishment and get us going. Raised by a widow who had come as a refugee from the then East Bengal, she was a matriculate when she married my Father. My parents se

Double vane pump : Double pump is comprised of a single housing containing of two PV2R single pumps configured in tandem and it is driven by a common shaft. Ports include one suction and  two discharge ports. The output flow is used to directly  separate circuits through the dual discharge ports.PV2R24A and PV2R34A is large volume double vane pumps  they are space-saving model from Yuken that is known for its low-noise operation. to comply with a wide range of application for instence the injection molding machine industry, we provide the wide range of delivery volume [5.8 -237.0 cm/rev] for the pump. The main internal spare parts of the pumps are built in as catidge kit. There for the maintenance can be easily done by simply changing the cartridges. Hydraulic pumps are used in hydraulic drive systems and it can be hydrostatic or hydrodynamic. A hydraulic pump is a mechanical source of power that converts mechanical power into hydraulic energy (hydrostatic energy i.e.

Piston Pump : The Cartridge Piston Pump is a fixed displacement. It is designed to be installed into a customer’s cavity, and driven by a customer supplied (and mounted) electric motor. This cartridge pump is also capable of operating with a variety of non-abrasive, non water-based fluids. There are three pump standard pump displacements available for the Cartridge Piston Pumps. The Cartridge Piston Pumps have no threaded ports but instead, rely on the correct interface of the customer’s. A 10 micron suction line filter is recommended to protect the cartridge piston pump and the system. Both the Miniature Piston Pumps and Cartridge Piston Pumps can operate with a variety of non-abrasive, non water based fluids,  Commonly used fluids include Automotive Transmission Fluid, hydraulic oils, DOT3 brake fluid. If users wish to use alternative oil, hydraulic fluid, ATF, or other they are warned to check that they have the same properties as those recommended. For More detail you can

This Makar Sankranti, wishing you and your family a lot of happiness, prosperity and good health. Happy Makar Sankranti 2019 ajay pandey   APPS   directional control valve   hand lever valve   HYDRAULIC EQUIPMENT   ios apps   KRIKO MACHINE   METAL CHIPS   MOBILE APP   solenoid coils   solenoid operated valves   YUKEN INDIA LIMITED https://www.yukenjsd.com/ Location:  5R/4, Govind Bhawan, 1st Floor, Faridabad NIT, Faridabad, Haryana 121001, India

Directional Control Valve : Directional Control Valve controls the direction of a fluid in the hydraulic system and pass through. This device is used to redirects or stops the fluid flow with the help of internal machine  in the valve. Valves contain ports that are external openings for fluid to enter and leave via connecting pipelines, The number of ports on a directional control valve (DCV ) is usually to identified  the term “ way”. There are different types of DCV that are classified based on the fluid path:  1)Check valves  2)Shuttle Valves  4)Two-way valves  5)Three way valves  6)Four way valves For further Technical details or Inquiries  mail to  info@jsdgroup.in  or  visit www.jsdgroup.in  some of Yuken regular Directional control valves available  ex stock : DSG-01-2B2-R220-N1-50 DSG-01-2B2-D24-N1-50 DSG-01-2B2-D24-70 DSG-01-2B2-A120-N1-50 DSG-01-2B2-A240-N1-50 DSG-01-2B2-D110-N1-50 DSG-01-2B2-A100-70