YUKEN INDIA LIMITED - JSD ENGINEERING PRODUCTS

Check valve : Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave. There are various types of check valves used in a wide variety of applications. Check valves are often part of common household items. Although they are available in a wide range of sizes and costs, check valves generally are very small, simple, or inexpensive. Check valves work automatically and most are not controlled by a person or any external control; accordingly, most do not have any valve handle or stem. The bodies (external shells) of most check valves are made of plastic or metal. Technical terminology : Cracking pressure — Refers to the minimum pressure differential needed between the inlet and outlet of the valve at which the first indication of flow occurs (steady stream of bubbles). Cracking pressure is also known as unseating head (pressure) or opening pressure.

Shaft description :  A shaft is a rotating machine element, usually circular in cross section, which is used to transmit power from one part to another, or from a machine which produces power to a machine which absorbs power. The various members such as pulleys and gears are mounted on it. A is shaft used for : A drive shaft, driveshaft, driving shaft, propeller shaft (prop shaft), or Cardan shaft is a mechanical component for transmitting torque and rotation, usually used to connect other components of a drive train that cannot be connected directly because of distance or the need to allow for relative movement between them. There are two types of shaft:  1.Transmission Shaft :  Counter Shaft. The counter shaft lies parallel to the main shaft and is driven by the input shaft through a pinion gear. Output  Shaft . The final component that carries the power out of the   transmission   gearbox and on to the wheels is the output   shaft . 2.Machine Shaft

Yuken hydraulic accessories: Suction Strainer: Pressure Gauge :  Temperature Gauge : Gauge Isolator : Air Blast Type Oil Cooler :  General Information This valve is designed to use when a pump starts to bleed off the air which is enclosed in a suction line or another lines in the system. Instructions: When this valve is used to bleed off the air for pump start, connect inlet port of the valve adjacent as much as possible to the discharge port of the pump. For the purpose of removing the air in the line, install the air bleed valve at the highest point in the overall circuit. In either case, outlet port of the valve must be connected to the tank line and it should be extended under the oil level in the reservoir. Hydraulic Fluids Type of Hydraulic Fluids Petroleum Base Oil : Use R&O (Rust and Oxidation inhibitor) type oils or anti-ware type oils (equivalent to ISO VG-32 & 46).  Synthetic Fluids:

Yuken Solenoid Coil : A solenoid is a coil of insulated or enameled wire wound on a rod-shaped form made of solid iron, solid steel, or powdered iron. Devices of this kind can be used as electromagnets, as inductors in electronic circuits, and as miniature wireless receiving antennas. Purpose of solenoid coil : When the ignition switch is turned on, a small electric current is sent through the starter solenoid. This causes the starter solenoid to close a pair of heavy contacts, thus relaying a large electric current through the starter motor, which in turn sets the engine in motion. Solenoid coils working : Solenoid is the generic term for a coil of wire used as an electromagnet. It also refers to any device that converts electrical energy to mechanical energy using a solenoid. The device creates a magnetic field from electric current and uses the magnetic field to create linear motion. Needs of solenoid : When the ignition key is turned all the way to the "